The fan unit C39165-A7070-B14 is used in CSPCI assemblies under the Siemens HiPath 4000 ...

The Line Trunk Unit Control, Extended LTUCX-board creates the interface between the central and peripheral units of the Telephone System.

The MD board (Message Distributor) has the function in the Hicom 390.1/391.1 system, to multiplex and to demultiplex ...

The STMA board (Subscriber and Trunk Module for ATM (Asynchronous Trasfer Mode)) has a optical 155 Mbit/s interface for MultiMode ...

The TIEL is a network board for the Hicom 125/130 and forms the interface for 4 E&M channels.

Die The APPS is an expansion board for the telephone system Siemens Hicom 300.

The MOH-boards turns the call tone music on for waiting users. For the music saved on the board the fees have already been paid by Gema.

Anschalt-Baugruppe zur externen Musikeinspielung für die Baugruppe [#4655] bei den HiPath 3300 und 3500.

The Signaling Unit SIU provides the system with dial tones, announcements, and music-on-hold.

Extension board for SIEMENS HICOM 200 telephone systems for 8 digital users.

The DPDR is a Release: 2++ (Euro-ISDN) board for the Siemens Hicom 200 telephone systems.

The Input-Output Processor IOP- board is a multifunction board for the Hicom 200.

The BUB is the central control board for the Hicom 200.

Memory Time Switch (MTS) is the base of the switching network for Hicom 200.

The Station Line Modul Burstsystem board (SLMB16), the user connection for burst procedure (U200-Interface), is used to connect digital devices and the switching terminal AC2.

The TMID 8 is an expansion board for the Siemens Hicom 200 telephone system with 8 impulse signal trunk line.

The Hicom Office Phone Mail has the following functions: 3 hours voice memory capacity, 40 user-mailboxes, 16 guest-mailboxes, 1 general message-mailbox, 10 information-mailboxes for ...

The SLAS8 is an analogue expansion board with 8 a/b connections for the Siemens Hicom 100E (108, 112, 118) and Octopus 10A/20A/30A.

The Phonemail Version 2.0 only works with the Hicom 150E OfficeCom/Point H1.2 and not on the 3.0 or 4.0.

The UAM board is an optional board for announcement and musik on hold for HiPath 3350 and HiPath 3550, that can be connected to a OPAL (C39195-A7001-B130) and a/b interface (for ...

The UAM-9610N board is an optional board for announcement and musik on hold for HiPath 3350 and HiPath 3550, that can be connected to a OPAL (C39195-A7001-B130) and a/b interface (for ...

Voicemail board for the voice storing (Voice Mail Module), waiting music and automatic centre. Hipath 3750/3700/3550.

Voicemail board for the voice storing (Voice Mail Module), waiting music and automatic centre. Hipath 3750/3700/3550.

Voicemailbaugruppe für die Sprachspeicherung (Voice Mail Modul), Wartemusik und automatische Zentrale ist für die Hipath 3750/3700.

Hard drive frame

The Phonemail board H6287-X001-2 with the software version 1.0 to 2.2 only works in the Hicom 150 E telephone system and is not upwardly compatible

The APPCU (order reference number S30807-K5415-X) is used for connecting 2-Mbit transmission paths with either 75 ohms or 120 ohms line impedance to the Hicom 300/300E and Hipath 4000 ...

Adapter for copper core and optical fiber cables. The maximum range for electrical paths is 240 m, and approximately 6 km for optical paths depending on type of cable. It is used for ...

The Data Processor 386 Mono DM3L-X500 is a variation (subclass) of the DM3L-X, and has the same functionality as the DM80-data processor for the 80CM.

The CBIB is the central control board for the Siemens Hicom 150E/150M OfficePro, V2.0.

Die Baugruppe SLMO8 (Subscriber Line Module Cost Optimized U_P0/E) stellet 8 Anschlüsse für den Anschluss von optiset E- und optiPoint 500-Endgeräten an HiPath 3750, HiPath ...

PC-Baugruppe für den Vermittlungsplatz AC5 bzw. AC-Win.

Die Baugruppe REAL S30807-Q5913-X wird in der HiPath 3750/HiPath 3700 als Amtsleitungsumschaltung und zur Steuerung von externen Sondereinrichtungen verwendetet.

The SL200 LAN board is an add-on board for the DSCX in the HiPath 4300 and the DPC5 in the HiPath 4500. In the HiPath 4300, the DSCX board operates as a part of the switching unit and ...

With the LAN module SL100 the telephone system can be integrated into the users LAN network. The module is configured as accessory module for the DSCX S30810-Q2261-X.

The Clock Generator Modul CGM as optional module for the central control board CBMOD, is required with elevated clock precision as in the employment with Hicom Cordless or digital ...

The V24/2- Module of the Hicom OfficeCom/Point offers two serial V24-interfaces for the connection to PC, printer, or (GCM)..

The V24/2- Module of the Hicom OfficeCom/Point offers two serial V24-interfaces for the connection to PC, printer, or (GCM)..

The V24/2- Module of the Hicom OfficeCom/Point offers two serial V24-interfaces for the connection to PC, printer, or (GCM)..

The CGMC is a clock module for the Hicom 150 E OfficePro, Hicom 150 E.

The CMS - Clockmodule is for the Hipath 3300, Hipath 3350, Hipath 3550, Hipath 3500, Hipath 3700, Hipath 3750 aswell as Octopus E900 telephone systems for the connection to the ...

The LIM module offers a ethernet (10BaseT/10 MBit) LAN connection over a 8 pin RJ45 connector.

The CMA module (Clock Module ADPCM) is need for certain configuration of HiPath Cordless Office. It is an optional submodule for the central control boards CBCC and CBRC and contains ...

The CMA module (Clock Module ADPCM) is need for certain configuration of HiPath Cordless Office. It is an optional submodule for the central control boards CBCC and CBRC and contains ...

The EVM module for Hipath 3350/3550/3500/3300, serves as integrated voice mailsystem.

The HDMO board consists of an magneto optical (MO) drive and a hard disk.

The CBRC board is the central control board for the Hipath 3500 / 3300 telephone systems and is equiped with 8x digital Upo interfaces, 2x So (ISDN) and 4x a/b analogue interfaces. ...

The CBFC (Central Board Flatpack Compact) board is the central control board of the Hicom 150E OfficePoint Rel 1.0, on which all central control and switching functions are performed. ...

The M2M board is a dynamic Memory, has a storage capacity of 2 MByte, and is used as Common Memory.

The DCL provides the signaling interface between the controller and the peripheral line trunk units LTU or the service unit SU.

Data Communication Link is a board for the Hicom 300 / 300 E and provides the link between the controller and the peripheral connection units LTU or the service unit SU for signaling ...

Trunk Module E&M Signaling is a board for the Hicom 300/300E and on it there are four full-duplex cross connection batches E&M.

The TMOM board (Trunk Module Outgoing Multipurpose) is used for the activation of special equipment (extension equipment) on the ...

The conference board CONF provides the features of override, call waiting (camp-on/knocking), and conference ...

Memory Time Switch is a board for the Hicom 300/300E. The memory time switch (MTS) is the basic element of the switching network (SN).

The SLMD is a line lock-out board and is used in the Hicom 300/300E. Up to 4 x TS Digitall U . 2x B(64 kbit/s) + D (16 kbit/s) can be attached.

The TMBD (Trunk Module "Bundespost Deutschland") (4 circuits per module) can be used for signalling with main station interfaces (MOSIG) as well as for direct inward dialing with the ...

The TMBD (Trunk Module "Bundespost Deutschland") (4 circuits per module) can be used for signalling with main station interfaces (MOSIG) as well as for direct inward dialing with the ...

Line Trunk Unite Control is a board for the Hicom 300/300E and forms the interface between the signal channel DCL, the cross bar switch CN and the peripheral board of the ...

Peripheral Clock Generator is a board for the Hicom 300/300E. The System Hicom is run synchronized.

The Signaling Unit, SIU provides the system with dial tones, announcements, and Music-on-hold. There are also dial-tone-receivers, MFV-receivers, test-senders, and test-receivers on ...

The TMBP (Trunk Module Bothway Inter-PBX Phantom Signaling) board offers four bothway PBX phantom signaling tie-line circuits per board to handle outgoing and incoming internal ...

The FDCA board for the Universal Server Shelf (UNS) from Siemens, is compatible to the Hicome 300E V3.1 (SP300-V3.2).

Board for the Common Control Universal Server (CCUS) from Siemens. Compatible to Hicom 300 E V3.1.

The LCC

The central clock generator (CCG) in the Hicom 390.1 system provides the users with the reference clock signals CKAREF (2048 Mhz) and FMBREF (4-kHz synchronizing pulse).

The central clock distributor CCD is one of the central modules and, together with the CCG module, comprises a failure unit.

The IOCG is used with the Hicom 390 systems and is a component of the group processor (GP) (DP/LTG). It contains the input/output control for the line trunk group (LTG) and the clock ...

Station Line Module Analog is a board for Hicom 300/300E and is the interface between the analog stations and the Hicom system.

The SLMB (Station Line Module with Burst System) board for burst signaling systems (U200 interface) is used for connecting digital terminals and the attendant console AC.

Die Baugruppe SLMA (Station Line Module Analog) mit der Sachnummer S30810-Q2057 ist das Bindeglied zwischen den analogen Teilnehmern und dem System Hicom mit 16 Teilnehmerleitungen. ...

The Ring Generator is a board for the Hicom 300/300E and creates alternating current of 65 V or 85 V with the frequencies 25 Hz or 500 Hz for the calling of analog users or for the ...

The TMEMW (Trunk Module E&M/World) board for the Hicom 300/300E, accommodates four bothway E&M tie-line circuits which handle incoming and outgoing traffic between two ...

The Line Control Unit is a board for the Hicom 300/300E and allows the connection of terminals and/or Hicom data-processing-systems. There are two frontside V.24 interfaces available. ...

The Digital Interface Unit ISDN is a board for Siemens Hicom 300/300E and HiPath 4000 telephone systems. The module implements two DIUS2 Primary Access (PMA)-interfaces S2 in ...

The Digital Interface Unit ISDN is a board for Siemens Hicom 300/300E telephone systems. The module implements two DIUS2 Primary Access (PMA)-interfaces S2 in accordance with CCITT. ...

The Digital Interface Unit ISDN is a board for Siemens Hicom 300/300E telephone systems. The module implements two DIUS2 Primary Access (PMA)-interfaces S2 in accordance with CCITT. ...

The Interface Processor, IP is a board for the Hicom 300/300E telephone system and has the function to direct the message exchange between the Switching Unit (SWU) and the servers. ...

The M8M (Memory Module 8 Mbyte) board is a dynamic memory. Depending on the memory configuration, the module has a capacity of 2 or 8 Mbyte (see module variants).

The Trunk Module Brothway Current Tone Frequency, TMBCT is the successor of the TMBC board and is for the Hicom 300/300E. It is however, loaded with a different software and is not ...

Trunk Module Brothway Current Tone Frequency, TMBCT is the replacement for the TMBC board and works with the Hicom 300/300E. It is however, loaded with a different software and is ...

The Quad Data Communication Link board, QDCL is the Interface between the peripheral and the central data processor DP (DP4L or DM3L) for the system Hicom 350 E.  The QDCL provides ...

The Quad Data Communication Link board, QDCL is the Interface between the peripheral and the central data processor DP (DP4L or DM3L) for the system Hicom 350 E.  The QDCL provides ...

The Message Buffer Unit board, MBU, directs the message traffic between the central Calculator, the switching technical peripherals, and the central switching network.

The Station Line Modul Digital U_P0 board SLMU allows 16 U_P0 interfaces the direct connection 16 UP0-Terminals or more S₀-Terminals over a ...

The Station Line Module Digital S0 board SLMS allows 8 S0-Interfaces the connection of up to 8 digital terminal per port.

The Line Controller S0 BG LCS0 serves 2 S0-interfaces for the connection of terminals. The S0-interface is a 4-wired cable, through which according to the AMI-Code-policy, data bits ...

The TMBCT (Trunk Module Bothway Current Tone Frequency) is the successor of the TMBC module. It is loaded with a different software, and is not compatible with the TMBC.

The Memory Time Switch board is compatible with the Hicom 300/300E. The digital time multiple MTS is the basic element of the switching network (SN) .

The TMX.21 (Digital Trunk Module) provides the adapter for the data traffic between the public data network IDN and the Hicom system as well as between Hicom and the terminals with ...

Line Trunk Unit Control is a board for the Hicom 300/300E and provides the interface between the converter for the signaling channel DCL, the switching network CN and the peripheral ...

The NCG (Network Clock Generator) is used in the Hicom 340.2, 370.1, 370.3, 380.3 and 390.3 configurations. It can generate the system clock independently or synchronize with external ...

The Memory- and Interface-Processor board MIP has the function within the System Hicom 300/300E´, to control the message exchange between the switchin Unit (SWU) and the service ...

In the Hicom 300 system the MIP (Memory and Interface Processor) board has the task of controlling the message exchange between the switching unit (SWU) and the service modules ...

The SLMQ board is a peripheral board for the Hicom 300 E. The SLMQ offers 16 two-core digital connection interface according to the ANSI-U-policy.

The Stream Control Central board SCC for Hicom 300/300E, is the interface between the central Processor DM80 and the peripheral boards of the Hicom 3X3. 

The function of the PSIO is to provide a total of six V.24 interfaces having enhanced functionality and higher data rates.

The Input Output Controller IOC is integrated in the Hicom 391.3 systems. It operates as a group I/O controller or as a centralized I/O controller.

The Subscriber Circuit Module Connection, Station Line Module analogue Board SLMA 16 is the connection between analogue extensions and the System Hicom 300E/300H.

The hub controller (HUBC) board is required to support the local area network (LAN) in all HiPath 4500 configurations. This board provides the physical link between the administration ...

The SLMO board (Subscriber Line Module, UPN Interface) allows the line termination (LT, line terminator) for 16 two-wired, ...

The Line Trunk Unit Control, Extended, LTUCE-board forms the interface between the central and peripheral units of the system.

The Data Processor Multi/Local board DPML is the central control processor of the SWU and the server.

The SLMB (Station Line Module with Burst System) board for burst signaling systems (U200 interface) is used for connecting digital terminals and the attendant console AC.

The SLC 16 allows for the connection of 16 cordless base stations for Hicom 300E as of Version 1.0.

The SLMQ board is a peripheral board for the Hicom 300 E/ Hipath 4000. The SLMQ board offers 16 bifilar digital connection ports according to the ANSI-U specifications.

The IOPA board is used for accessing the peripheral storage devices (CT, HD) of the service modules.

The Station Line Module Analog board SLMA16 is the link between the 16 analog users and the System Hicom 300E.

The Subscriber Line Module, UP0/E Interface, SLMO24 Board has 24 UP0/E-Interfaces.

The TM2LP board is a analog trunk module with (8x HKZ) and is used to connect the hipath 3800 system to the analog trunk.

The TM2LP board is a analog trunk module with (8x HKZ) and is used to connect the hipath 3800 system to the analog trunk.

The TM2LP board is a analog trunk module with (8x HKZ) and is used to connect the hipath 3800 system to the analog trunk.

The STMA has an optical fiber interface with a transmission capability of up to 155 Mbit/s. Since it serves up to 4 2Mbit highways on the system side, only 8 Mbit/s are used. The STMA ...

The DSC80 board for the Hicom 310 E and Hicom 330 E, unites all features that a central control unit of a Hicom 300 System requires, onto a single board.

Der DSC80 mit der Sachnummer S30810-Q216100 ist eine neue Baugruppe für die Hicom 310 E bzw. Hicom 330 E.

The STMD2 board offers eight S₀ interfaces with two B-channels for voice and data transfer and a D channel for trunk and user lines. The board users a SIPAC connector to ...

The Station/Trunk Module Digital S₀ board STMD 2 offers the functions of TMD- and SLMS- on a single board. It contains 8 batches with ...

The Subscriber Line Module, U_P0/E Interface, SLMO16 Board has 16 U_P0/E-Interfaces. The SLMO-board offers following interface connections for 2-wire digital ...

The Subscriber Line Module, U_P0/E Interface, SLMO24 Board has 24 U_P0/E-Interfaces. This board works on Hicom 300E, Hicom 300H, and Hipath 4000.

The subscriber trunk hybrid card (STHC) board has the combined functionality of ...

Die SLMOP-Baugruppe hat 24 U_P0/E-Schnittstellen für 2-adrige digitale Teilnehmerleitungen nach dem Standard U_P0/E an denen höchstens 3 Geräte ...

The Station/Trunk Module Digital S₀ board STMD8 offers an interface of the functions from TMD and SLMS. It contains eight sets with S₀-interface.

The subscriber trunk hybrid card (STHC) board has the combined functionality of the STMD and SLMO boards.

The SLOP2 is an expansion board for the Hicom / Hipath telephone system.

The SD3HP is a framework for the inclusion of SCSI drives for the Hicom 300 and HiPath 4000.

The digital interface unit DIUC is used to connect digital exchange systems and PABXs via PCM30 lines or analog exchange systems and PABXs via A/D converters, PCM30 multiplexers and ...

The Signaling Unit, SIUX2 board is a replacement for the SIU-board in the central and peripheral frames.

The Line Control/Line Bus Control, LBU-board for the Hicom 300/300E allows the connection of terminals and/or data-processing-systems over two frontsided V.24-interfaces.

The SLMA-C300, Subscriber Line Analog expansion board offers 24 analog user sets including clip-functions and supports all functions of the PABX-terminals.

An SLMA3 board interfaces between the system and analog devices. These boards convert signals from analog-to-digital and from digital-to-analog. ...

The SLC16N (Subscriber Line Cordless) board is compatible with all hardware platforms of the Hipath 3750/3700 as of V5.0 und Octopus 800 and allows the connection of 16 mobile ...

The "Subscriber Line Module CMI24" (SLC24) is an extension board for Hicom 150 H Office Pro, Hicom 300 E V3.0, Hicom 300 E V3.1, Hicom 300 H V1.0, and HiPath 4000 V1.0/V2.0. The SLC24 ...

The SLC16N board (Subscriber Line Cordless) is a board with 16 U_P0/E-ports and allows the connection of base stations for the Cordless Office. The board is ...

The Data Processor 486 board DP486 for Hicom 300/300E, is the central control processor of the SWU and the server. The board is fully pin- and SW-compatible with its forerunners DPML, ...

The Data Processor 386 Dynamic Memory board DP3DM (16 MB) is the central control processor of the SWU and the server.

The WAML is an interface card providing connectivity inside a Hicom 300 PBX between the Atlantic LAN (ALAN"), an External LAN (ELAN") and the PCM speech highways.

The DDCL (Double Data Communication Link) for Hicom 300/300E, provides the signaling interface between the LTUs and the DP in the SWU.

The Data-Processor-Mono board DM80 makes all central control functions (DP, IOPA, LCU) possible for the Hicom 3X3. There is a system clock on this board.

On the Trunk Module Outgoing Multipurpose board TMOM, there are two adapter sets for connecting special equipment (peripheral devices).

Die STMD3-Baugruppe S30810-Q2217-X ist in der Funktion identisch mit der STMD2. Auf Grund des Einsatzes neuer Bauelemente wurde diese Baugruppe mit neuer Quellennummer eingeführt. ...

Die STMD3-Baugruppe S30810-Q2217-X10 ist in der Funktion identisch mit der STMD2.

The MTS64 is the memory time switch for the modular cabinet systems Hicom 380.3 and Hicom 391.3.

The Memory Time Switch and Clock, MTSCG-board is a central board. the board units the functionality of a MTS64- or a MTS128-coupling field (Memory Time Switch) and a NCG (Network ...

The SLMAE board (Subscriber Line Module Analog Enhanced) offers 24 analog a/b interfaces.

The Data Processor 386 Mono DM3L-X for Hicom 300/300E, is a variation (subclass) of the DM3L-X, and has the same functionality as the DM80-data processor for the 80CM.

The Data Processor 386 Mono DM3L-X is a variation (subclass) of the DM3L-X, and has the same functionality as the DM80-data processor for the 80CM.

The SIUCO (Signaling Unit with Conference Unit) is used in the CCDX (380.3) and GCDX (390.3) shelves. The SIUCO combines the functions of the SIU and CONF boards.

The SIUCO board unites the functions of the SIU and CONF boards.

The SIUCX (Signaling Unit with Conference Unit) board replaces the SIUCO board in the central system shelves of EC (compact) systems (see also SIUX description).

The Signalilng Unit (SIUX) board is a replacement for the SIU board in the central and peripheral system shelves.

The Signaling Unit with Conference and Extension (SICOE) board provides the system 600 ECX with dial tones, announcements and music on hold, and the matrix switch extension.

The Signaling Unit with Conference and Extension (SICOE) board provides the system 600 ECX with dial tones, announcements and music on hold, and the matrix switch extension.

The VCM (Voice Compression) board compresses and decompresses voice connections. With the integrated voice compression to Kbps, up to 4 call connections can be made ...

Integrated Voice Compression at 16 Kbps allows up to 4 calls per channel simultaneously. Compressed voice connections can be switched to various destinations without decompressing and ...

The Input Output Controller Switching Network (IOCSN) belongs to the central boards and together with a NCG and up to 7 MTS64 a breakdown unit.

The Subscriber Circuit Module Connection, Station Line Module analog Board SLMA2 is the connection between analog extensions and the System Hicom 300E/300H.

The Line Trunk Unit Control, Extended (LTUCE) board is the interface between the central and peripheral units of the telephone system.

The Data Processor 486 with LAN Node (DP4L) is based on the DP486 board. The board is compatible with the DM3L.

The Data Processor 486 with LAN Node (DP4L) is based on the DP486 board. The board is compatible with the DM3L.

The Input-Output Processor SCSI and Alarm-Control, IOPAX-board is a multifunctional board.

The call generator S30810-Q2258-X generates AC voltages of 65 V or 85 V with ...

The Data Processor 486 Mono with LAN (DM4L) has the same functions as the DM3L-board, however, it has a higher performance under the 310E and 350E systems.

The Data Processor 486 Mono with LAN (DM4L) has the same functions as the DM3L-board, however, it has a higher performance under the 310E and 350E systems.

The DSCX board S30810-Q2261-X is the central control module (base board) from Hicom ...

The DSCX board S30810-Q2216-X100 (Data Processor Board and Extended Serial Channel) is the central processor module of the ...

The processor module DPC5 is the central control board and is used from Hicom 300E V3.0 onward.

The processor board (DPC5) is the central controler for a Siemens telephone system Hicom 300E / H3000 / H4000, HiPath 4300, and HiPath 4500.

The Hicom internal application server DMP5L with the SW platform for clien/server applications can be used as of Hivom V2.0. The DMP5L serves as internal server platform either for ...

The Control Unit IP HiPath HG 3575 (NCUI) board is the main central control for the IPDA and gateway unit in a local system as part of a distributed PBX.

The subscriber trunk module IP HiPath 3570 (STMI) board is a interface board for the HiPath 4000 in a IPDA (IP Distributed Architecture) System. The STMI board converts the speech ...

The subscriber trunk module IP HiPath 3570 (STMI) board is a interface board for the HiPath 4000 in a IPDA (IP Distributed Architecture) System. The STMI board converts the speech ...

The Control Unit IP HiPath HG 3575 (NCUI) board is the main central control for the IPDA and gateway unit in a local system as part of a distributed PBX

Die Baugruppe NCUI S30810-Q2302-X (Control Unit IP HiPath HG 3575) fungiert als zentrale Steuerung für die IPDA und als Gateway-Einheit eines zu einer verteilten TK-Anlage gehörenden ...

Die Baugruppe NCUI S30810-Q2302-X (Control Unit IP HiPath HG 3575) fungiert als zentrale Steuerung für die IPDA und als Gateway-Einheit eines zu einer verteilten TK-Anlage gehörenden ...

The board NCUI (Control Unit IP HiPath HG 3575) functions as central control unit for the IPDA and as gatway-unit as part of a ...

The DSCXL board (Data and Switch Processor for Compact PCI/LAN) is the central processor board for the HiPath 4000 V2.0 and ...

Die Baugruppe DSCXL (Data and Switch Processor for CompactPCI/LAN) ist die zentrale Prozessorbaugruppe ab der HiPath 4000 V2.0

The RTM board (Rear Transition Module) is used in the CSPCI board in HiPath 4000.

The MCM board (Management and Control Module) is used in the CSPCI board in HiPath 4000.

The CBSAP board (Central Board Synergy Access Platform) is responsible for control- and switching -processes for the HiPath ...

The STMI2 board (Subscriber Trunk Module IP HiPath 3570 V2.0) forms the interface for HiPath 4000 in a IPDA-system (IP ...

The Digital Interface Unit for RMS2 (DIUR2) is the interface between the basic system of the Hicom system and the spatially distinct system component RMS2.

The Digital Interface Unit for RMS2 (DIUR2) is the interface between the basic system of the Hicom system and the spatially distinct system component RMS2.

central Control Unit for Hicom 200

With the TML8 board (Trunk Module Loop) 8 analog trunk lines can be employed for the Hicom 150E according to the ...

The Trunk Module Outgoing Multipurpos (TMOM) has two adjustment sets for the activation of special attachments (peripheral equipment).

The TMS2M is an expansion board for Siemens Hicom 150E OfficePro with a primary rate interface (S2M).

The Station Line Module Analog board SLMA is the link between the analog users and the system Hicom 200.

The Station/Trunk Module Digital S₀ (STMD8) unites the functions of the TMD- and SLMS boards. It has 8 sets with S₀-Interface.

The Station/Trunk Module Digital S₀ (STMD8) unites the functions of the TMD- and SLMS- boards. It has 8 sets with S₀-Interface.

The MC3 is a Peripheral board for the Hicom 150E /Hicom 200.

The expansion board SLA16 (Subscriber Line Analog) is for analog a/b interfaces, for example traditional standard phones as well as accessory equipment such as a fax.

The SLMT board is an extension board for Hicom Trading. The board is used with the Hicom 300/300E system.

The TRIM (System Module Tape Interface) board is a peripheral board for the Hicom 300/300E.

Die MUXU-Baugruppe ist eine Erweiterungsbaugruppe zur Anschaltung von Trading 300-, Dipatcher 300-,oder Executive 300-Arbeitsplätze. Eingesetzt wird die Baugruppe in Simens Hicom ...

Die SLMY-Baugruppe ist eine Erweiterungsbaugruppe, die den Anschluss von max. 120 Leitungen und max. 30 Trading-Arbeitsplätzen ermöglicht. Eingesetzt wird die Baugruppe in Simens ...

The SLMO24 (Subscriber Line Module Cost Optimized U_P0/E) board offers 24 connections for the connection of optiset E- and optiPoint 500 devices to the HiPath 3750, HiPath ...

The SLMC8  is a cordless board used in the Octopus E800 bzw. Hicom 150E OfficePro telephone system to connect up to 8x BS Dect stations V.1.

The EXTEB (Extension Board) is an extension board for the Hicom 150E officeCom system to make additional system extension and analog "Message waiting" possible.

The Trunkmodule S2M, board TS2, allows the connection to a NT1 over a symmetric conductor (Four-wire-twisted-pair-cable) for simultaneously transfer up to 30 B-channels (speech ...

The Trunkmodule S2M (TS2R) board- frame version, allows the connection onto a NT1 over a symmetrical line (four-wired-twisted-pair-cable) for the simultaneous transfer of up to 30B ...

The Trunkmodul S2M (TMS2) makes the connection to a NT1 over a symmetrical line (four-wired twisted-pair cable) with the concurrent transmission of up to 30 B channels (voice ...

The SLC16 (Subscriber Line Cordless) board can be used in the Hicom 150E OfficePro/Com, Hipath 3750, Hipath 3700, Octopus E800 .

The 16SLA (Subscriber Line Analogue) allows you to connect up to 16 analogue a/b extensions as for example analogue standard-phones or fax/answering machine.

The user group board 8SLA (Subscriber Line Analog) is for the connection of 8 analog a/b interfaces for traditional standard telephones, such as fax implementations of the fax group ...

The user group board 4SLA (Subscriber Line Analog) is for the connection of 4 analog a/b interfaces for traditional standard telephones, such as fax implementations of the fax group ...

The 8SLA 19" (Subscriber Line Analogue) board allows you to connect up to 8 analogue a/b extensions as for example standard-phones or fax/answering machine.

The 4SLA (Subscriber Line Analogue) allows you to connect up to 4 analogue a/b extensions as for example standard-phones or fax/answering machine.

The 8SLAR (Subscriber Line Analogue) allows you to connect up to 8 analogue a/b extensions as for example analogue standard-phones or fax/ answering machine.

The SLA24N (Subscriber Line Module Analog) offers 24 connections for the connection of analog devices to the HiPath 3750, HiPath 3550, ...

The SLA16N (Subscriber Line Analogue) allows you to connect up to 16 analog a/b extensions as for example analog standard-phones or fax/answering machine. The board is used in Hicom ...

Die HXGS (S30810-Q2931-X100) ist die HiPath HG1500 V2.0-Baugruppe und ermöglicht die Verbindung zwischen HiPath 3000 und einer LAN-Umgebung. Die Baugruppe ist für den Einsatz in ...

The HXGS board is the HiPath HG1500 V2.0 board and allows the connection between HiPath 3000 and a LAN Network. The board is used with HiPath 3550 and HiPath 3350.

The Central Board Processor Compact (CBPC) central board is for the control of the Hicom 150E OfficeCom/ Point telephone system.

The Central Board Processor Compact (CBPC) central board is for the control of the Hicom 150E OfficeCom/ Point telephone system.

The CBCC board is the central control board for the Hipath 3550 / 3350 telephone system, equiped with 8 digital Upo interfaces and 4 a/b analog interfaces.

The CBCC (Central Board with Coldfire Com) board is the central control board for HiPath 3550 and HiPath 3350. It is employed as of software version HiPath 3000 V5.0. Like its ...

The CBRC board is the central control board for the HiPath 3500/ 3300 telephone system. It is equipped with 8 digital U_P0 TS, 2 S₀ (ISDN) and 4 a/b analog TS. ...

Die CBRC Baugruppe ist die Zentrale Steuerungsbaugruppe für die Hipath 3500 / 3300 Telefonanlage.

The CBCPR board handles the central control and switching operations of the the HiPath 3750 and HiPath 3700.

The SBSCO is the central control board for the Hipath 500.

The HXGS is the HiPath HG1500 V2.0 board and allows the connection between HiPath 3000 and a LAN network. The board is for use in HiPath 3550 and HiPath 3350.

The HXGS is the HiPath HG1500 V2.0 board and allows the connection between HiPath 3000 and a LAN network. The board is for the use in HiPath 3550 and HiPath 3350.

Die HXGS2 (S30810-Q2940-X) ist die HiPath HG1500 V2.0-Baugruppe und ermöglicht die Verbindung zwischen HiPath 3000 und einer LAN-Umgebung. Die Baugruppe ist für den Einsatz in HiPath ...

The HXGM2 is a Peripheral board for the Hicom OfficePro, Hipath 3550/ 3700/ 3750 Octopus E / F.

The HXGM3 board prepares the functions of the HiPath HG1500 Version 3.0 for the HiPath 3750 and HiPath 3700.

The HXGS3 board is the VoIP (Voice over IP) gateway board, that offers the functions of the HG1500 Version 3.0 in HiPath 3550 and HiPath 3350.

The HXGS3 board is the VoIP (Voice over IP) gateway board, that offers the functions of the HG1500 Version 3.0 in HiPath 3550 and HiPath 3350.

Diese Baugruppe stellt vier S0-Basisanschlüsse für den Einsatz in HiPath 3500 und HiPath 3300 bereit.

The Subsciber board SLAD8 offers 8 analog interfaces with CLIP function. All conventional telephones and accessories such as a fFax, can be connected.

The Subsciber board SLAD8 offers 8 analog interfaces with CLIP function. All conventional telephones and accessories such as a fFax, can be connected.

The Subsciber board SLAD8 offers 8 analog interfaces with CLIP function. All conventional telephones and accessories such as a fFax, can be connected.

The user board SLAD8R offers 8 analog interfaces with CLIP function. It is employed in the HiPath 3300 and HiPath 3500. All conventional telephones and accessories such as Fax and ...

The CBMOD board is the central control board for Hicom 150E officePro with a DRAM memory of 2MB, on which all central control and switching functions are executed.

The CBMOD board is the central control board for Hicom 150E officePro with a DRAM memory of 2MB, on which all central control and switching functions are executed.

The CBMOD board is the central control board for Hicom 150E officePro with a DRAM memory of 4MB, on which all central control and switching functions are executed.

The STMS8 expansion board is for the Octopus E300 / 800 telephone system. It provides 8 sets with S₀-interface feeds.

The VCD board is a peripheral board for the Hicom 300E.

The SLCSM (Subscriber Line CMI Synchronisation Module) board is a GPS board. It is used for the synchronization of networked HiPath Cordless systems.

The NIC board is a board for the Hinet VS 1600.

The SLAS4 is an analogue expansion board with 4 a/b connections for the Siemens Hicom 100E (108, 112, 118) and Octopus 10A/20A/30A.

The STLS4 19" board has 4 S-interfaces, it can be run as external network interfaces in TE-Mode or alternatively as internal S-interface (Bus PMP) in NT-Mode. This board is used with ...

The STLS2 19" frame board is for the Hinet V 1600 and has 2 S₀-interfaces, it can be used as external network interface in TE-Mode or alternatively as internal interface ...

The STLS4R is a 19" board with 4 S₀-interfaces, it can be used as external network interface in TE-mode or alternatively as internal S₀-interface (Bus PMP) in ...

The STRB board is used for monitoring, alarming, controling, regulation, and door-opener functions. This board is for Hicom 150E OfficeCom /Point, Octopus E20/E30, and Hicom ...

Die TMACH-Baugruppe (S30810-Q9556-X100) bildet die analoge Schnittstelle zwischen dem System Hicom 300 und dem öffentlichen Amt in der Schweiz.

Die TMACH-Baugruppe (S30810-Q9556-X100) bildet die analoge Schnittstelle zwischen dem System Hicom 300 und dem öffentlichen Amt in der Schweiz.

The GEE board is used for the recording of call charge pulses and in their preprocessing there are in each case 4 charge- receivers in the following Modules available. This board is ...

The MOH-board turns on the music on hold for waiting users. The fees for the music saved on the board have already been paid by Gema. Runs on Hicom 150E office COM, Point, ...

The CONTR is the central control board of the Hicom 200.

The CB is a central control board for the Hicom 125/130/200.

The TML8W board offers eight analog trunk lines according to the main station line procedure for the HiPath 3750 and HiPath 3700 systems. By attaching the call-charge receiver unit ...

The TML8W board offers eight analog trunk lines according to the analog/PSTN procedure, for HiPath 3750 and HiPath 3700.

The TML4 is a network board with 4 ports for the Hicom 150E OfficePro/ Com.

The KIB (Key Interface Board) for the Hicom 125/130. KIB 32E is for the connection of 64 subscriber interfaces. KIB 32, is for the connection of 32 subscriber interfaces.

The STMD8 (Station Trunk Module Digital S₀) board for Hicom 125/130, combines the functions of the TMD and SLMS boards onto a single board. It offers 8 sets with ...

The Station Trunk Module Digital S₀ (STMD 4) board is the grouping of TMD and SLMS functions on a single board.

The Station Trunk Module Digital S₀, Board STMD8 unites the functions of the TMD and SLMS boards. It offers 8 sets with S₀-interface.

The LTB1 is a combination board for the Hicom 120 with 4 trunk lines and 8 internal extension lines.

The LTB1 is a combination board for the Hicom 120 with  8 internal extension lines.

The SBSD is the central board for the Hicom 116, 6x S₀- and 6x a/b connections.

The SBSD is the central board for the Hicom 116. 6x So and 6x a/b connections.

The SBSD is the central board for the Hicom 116. 6x So and 6x a/b connections.

The SLA/S is an analog expansion board for 8 a/b connections.

The EXM Interface for the activation of an external music source

The EXM Interface for the activation of an external music source

The Flatpack F is the central control board of the Hicom 150E Office One in the version 2/4/4 for: 2x S₀ internal/external (ISDN connections ), 4x ...

The PC8 is a central control unit.

The MB (Motherboard) 6/4 is the central control board for the Hicom 118 E. It offers 4 U_P0 interfaces for the connection of digital phones (ie. Optiset E) and 4 analogue ...

The MB (Motherboard) 4/4 is the central control board for the Hicom 112 E. It offers 4 U_P0 interfaces for the connection of digital phones (ie. Optiset E) and 4 analogue ...

The MB (Motherboard) 2/4 is the central control board for the Hicom E 108. It offers 2 U_P0 interfaces for the connection of digital phones (ie. Optiset E) and 4 analogue ...

The SLU8 19" is an expansion board with 8 digital interfaces. In the master/slave operation, up to 16 digital terminals are possible. This board is used with Hicom 150E rack assembly ...

The SLU8R is an expansion board with 8 digital UP0 interfaces. In the Maser/Slave operation up to 16 digital terminals are possible. This board is used with Hipath 3500/3300.

The TLA4 is a pulse signal board with 4 analogue trunk lines for dial pulse and DTMF-dialing system for the Hicom 150E OfficeCom/ Point, Hipath 3550/3350.

The TLA2 is a pulse signal board with 2 analogue trunk lines for dial pulse and DTMF-dialing system for the Hicom 150E OfficeCom/ Point, Hipath 3550/3350.

The STLS2 is a board with 2 S₀-interfaces, it can be run as external network interface in TE-mode or alternatively as internal S₀-interface (Bus PMP) in ...

The TLA8 board is used for a analog/PSTN connection with 8 analog trunk lines for pulse dialing and DTMF dail procedures for HiPath 3550 and HiPath 3350.

The TLA4R is a 19" puls signal network board with 4 analogue dial pulse and DTMF network interface for the Hipath 3500 and Hipath 3300.

The ILAN Bridge board gives the Hicom 150 E OfficeCom the possibiliy to connect the internal LAN with an external LAN over the public ISDN network.